Skip to content
Snippets Groups Projects
libxslt.m4 7.83 KiB
Newer Older
  • Learn to ignore specific revisions
  • # Based on:
    # Configure paths for LIBXML2
    # Toshio Kuratomi 2001-04-21
    # Adapted from:
    # Configure paths for GLIB
    # Owen Taylor     97-11-3
    #
    # Modified to work with libxslt by Thomas Schraitle 2002/10/25
    
    
    dnl AM_PATH_XSLT([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
    dnl Test for XML, and define XML_CFLAGS and XML_LIBS
    dnl
    
    AC_ARG_WITH(xslt-prefix,
                [  --with-xslt-prefix=PFX   Prefix where libxslt is installed (optional)],
                xslt_config_prefix="$withval", xslt_config_prefix="")
    AC_ARG_WITH(xslt-exec-prefix,
                [  --with-xslt-exec-prefix=PFX Exec prefix where libxslt is installed (optional)],
                xslt_config_exec_prefix="$withval", xslt_config_exec_prefix="")
    AC_ARG_ENABLE(xslttest,
                  [  --disable-xslttest       Do not try to compile and run a test LIBXSLT program],,
    
    
      if test x$xslt_config_exec_prefix != x ; then
         xslt_config_args="$xslt_config_args --exec-prefix=$xslt_config_exec_prefix"
         if test x${XSLT_CONFIG+set} != xset ; then
            XSLT_CONFIG=$xslt_config_exec_prefix/bin/xslt-config
         fi
      fi
      if test x$xslt_config_prefix != x ; then
         xslt_config_args="$xslt_config_args --prefix=$xslt_config_prefix"
         if test x${XSLT_CONFIG+set} != xset ; then
            XSLT_CONFIG=$xslt_config_prefix/bin/xslt-config
         fi
      fi
    
      AC_PATH_PROG(XSLT_CONFIG, xslt-config, no)
      min_xslt_version=ifelse([$1], ,1.0.0,[$1])
      AC_MSG_CHECKING(for libxslt - version >= $min_xslt_version)
      no_xslt=""
      if test "$XSLT_CONFIG" = "no" ; then
        no_xslt=yes
      else
        XSLT_CFLAGS=`$XSLT_CONFIG $xslt_config_args --cflags`
        XSLT_LIBS=`$XSLT_CONFIG $xslt_config_args --libs`
        xslt_config_major_version=`$XSLT_CONFIG $xslt_config_args --version | \
               sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
        xslt_config_minor_version=`$XSLT_CONFIG $xslt_config_args --version | \
               sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
        xslt_config_micro_version=`$XSLT_CONFIG $xslt_config_args --version | \
               sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
        if test "x$enable_xslttest" = "xyes" ; then
          ac_save_CFLAGS="$CFLAGS"
          ac_save_LIBS="$LIBS"
          CFLAGS="$CFLAGS $XSLT_CFLAGS"
          LIBS="$XSLT_LIBS $LIBS"
    dnl
    dnl Now check if the installed libxslt is sufficiently new.
    dnl (Also sanity checks the results of xslt-config to some extent)
    dnl
          rm -f conf.xslttest
          AC_TRY_RUN([
    #include <stdlib.h>
    #include <stdio.h>
    #include <string.h>
    
    #include <libxslt/xslt.h>
    int 
    main()
    {
      int xslt_major_version, xslt_minor_version, xslt_micro_version;
      int major, minor, micro;
      char *tmp_version;
    
      system("touch conf.xslttest");
    
      /* Capture xslt-config output via autoconf/configure variables */
      /* HP/UX 9 (%@#!) writes to sscanf strings */
      tmp_version = (char *)strdup("$min_xslt_version");
      if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
         printf("%s, bad version string from xslt-config\n", "$min_xslt_version");
         exit(1);
       }
       free(tmp_version);
    
       /* Capture the version information from the header files */
       tmp_version = (char *)strdup(LIBXSLT_DOTTED_VERSION);
       if (sscanf(tmp_version, "%d.%d.%d", &xslt_major_version, &xslt_minor_version, &xslt_micro_version) != 3) {
         printf("%s, bad version string from libxslt includes\n", "LIBXSLT_DOTTED_VERSION");
         exit(1);
       }
       free(tmp_version);
    
     /* Compare xslt-config output to the libxslt headers */
      if ((xslt_major_version != $xslt_config_major_version) ||
          (xslt_minor_version != $xslt_config_minor_version) ||
          (xslt_micro_version != $xslt_config_micro_version))
        {
          printf("*** libxslt header files (version %d.%d.%d) do not match\n",
             xslt_major_version, xslt_minor_version, xslt_micro_version);
          printf("*** xslt-config (version %d.%d.%d)\n",
             $xslt_config_major_version, $xslt_config_minor_version, $xslt_config_micro_version);
          return 1;
        } 
    /* Compare the headers to the library to make sure we match */
      /* Less than ideal -- doesn't provide us with return value feedback, 
       * only exits if there's a serious mismatch between header and library.
       */
    
        /* copied from LIBXML_TEST_VERSION; */
        xmlCheckVersion(LIBXML_VERSION);
    
    
        /* Test that the library is greater than our minimum version */
        if ((xslt_major_version > major) ||
            ((xslt_major_version == major) && (xslt_minor_version > minor)) ||
            ((xslt_major_version == major) && (xslt_minor_version == minor) &&
            (xslt_micro_version >= micro)))
          {
            return 0;
           }
         else
          {
            printf("\n*** An old version of libxslt (%d.%d.%d) was found.\n",
                   xslt_major_version, xslt_minor_version, xslt_micro_version);
    
    Nick Wellnhofer's avatar
    Nick Wellnhofer committed
            printf("*** You need a version of libxslt newer than %d.%d.%d.\n",
    
               major, minor, micro);
            printf("***\n");
            printf("*** If you have already installed a sufficiently new version, this error\n");
            printf("*** probably means that the wrong copy of the xslt-config shell script is\n");
            printf("*** being found. The easiest way to fix this is to remove the old version\n");
            printf("*** of LIBXSLT, but you can also set the XSLT_CONFIG environment to point to the\n");
            printf("*** correct copy of xslt-config. (In this case, you will have to\n");
            printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
            printf("*** so that the correct libraries are found at run-time))\n");
        }
      return 1;
    }
    ],, no_xslt=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
           CFLAGS="$ac_save_CFLAGS"
           LIBS="$ac_save_LIBS"
         fi
      fi
    
      if test "x$no_xslt" = x ; then
         AC_MSG_RESULT(yes (version $xslt_config_major_version.$xslt_config_minor_version.$xslt_config_micro_version))
         ifelse([$2], , :, [$2])     
      else
         AC_MSG_RESULT(no)
         if test "$XSLT_CONFIG" = "no" ; then
           echo "*** The xslt-config script installed by LIBXSLT could not be found"
           echo "*** If libxslt was installed in PREFIX, make sure PREFIX/bin is in"
           echo "*** your path, or set the XSLT_CONFIG environment variable to the"
           echo "*** full path to xslt-config."
         else
           if test -f conf.xslttest ; then
            :
           else
              echo "*** Could not run libxslt test program, checking why..."
              CFLAGS="$CFLAGS $XSLT_CFLAGS"
              LIBS="$LIBS $XSLT_LIBS"
              AC_TRY_LINK([
    #include <libxslt/xslt.h>
    #include <stdio.h>
    ],      [ LIBXSLT_TEST_VERSION; return 0;],
            [ echo "*** The test program compiled, but did not run. This usually means"
              echo "*** that the run-time linker is not finding LIBXSLT or finding the wrong"
              echo "*** version of LIBXSLT. If it is not finding LIBXSLT, you'll need to set your"
              echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
              echo "*** to the installed location  Also, make sure you have run ldconfig if that"
              echo "*** is required on your system"
              echo "***"
              echo "*** If you have an old version installed, it is best to remove it, although"
              echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ],
            [ echo "*** The test program failed to compile or link. See the file config.log for the"
              echo "*** exact error that occured. This usually means LIBXSLT was incorrectly installed"
              echo "*** or that you have moved LIBXSLT since it was installed. In the latter case, you"
              echo "*** may want to edit the xslt-config script: $XSLT_CONFIG" ])
              CFLAGS="$ac_save_CFLAGS"
              LIBS="$ac_save_LIBS"
           fi
         fi
    
         XSLT_CFLAGS=""
         XSLT_LIBS=""
         ifelse([$3], , :, [$3])
      fi
      AC_SUBST(XSLT_CFLAGS)
      AC_SUBST(XSLT_LIBS)
      rm -f conf.xslttest
    ])